No sound from your VITURE glasses? Check these in order

Picture but no sound on a VITURE Beast, Luma or Pro 2? Usually the glasses are on mute or your device sends audio elsewhere. Fixes for docks and the Neckband too.

Type
Fix
By
Cole
Updated
Verified

Your VITURE glasses show a picture, but they're silent. Don't worry about the speakers yet. Almost every case comes down to one of two things. The glasses are set to adjust brightness, not volume, so you never turned them up. Or your phone, computer or console is sending the sound somewhere else. Both take seconds to check.

Note

These steps come from VITURE's help center and its guides for the Beast, Luma series, Pro 2, Pro Neckband, docks and adapters, plus Apple, Microsoft, PlayStation and Nintendo support pages. All were checked November 15, 2026. We haven't tested every setup below ourselves, and we flag our own suggestions as we go.

Quick fixes, in order

  1. Switch the buttons to volume. On most VITURE glasses, the left buttons change brightness until you tell them otherwise. The next section shows how on your model.
  2. Turn up your device too. VITURE's help center says to raise the volume on both the glasses and the source.
  3. Pick the glasses as the output. In your device's sound settings, VITURE says to choose "VITURE glasses" or "USB Audio."
  4. Unplug and plug back in. VITURE says this resets the audio connection.
  5. Restart your phone, computer or console. Some devices need it before they treat the glasses as a speaker.
  6. Using a dock, adapter or the Neckband? Jump to that section below. Each one adds its own catch.

Turn the glasses up on your model

Each VITURE pair has a button that flips the left rocker between brightness and volume. If you've only ever changed brightness, volume may still sit at a low level.

GlassesSwitch to volumeThen
Beast and Phantom BeastTap L1 onceL+ and L- change volume
Luma, Luma Pro, Luma UltraPress L1L+ and L- change volume
Pro 2Press L1 onceL+ and L- change volume

On the Beast you can also hold L1 to open the menu, then go to Audio, then Volume. The menu's volume runs from 0 to 11. So if it shows 0, that's your answer.

Where your device sends the sound

Mac. Open the Apple menu, then System Settings, then Sound, then Output. Pick the VITURE entry and make sure Mute is off.

Windows. Go to Settings, then System, then Sound, then Output, and choose the glasses. Microsoft's own troubleshooting starts with checking which output device is selected, because a display or headset can quietly take over.

iPhone and iPad. Open Control Center and tap the AirPlay button on the audio controls. If AirPods are connected, they usually win, so disconnect them or pick the glasses by hand.

Android. Open the media output switcher from your quick settings and pick the glasses or USB audio. Names vary by phone maker.

Steam Deck. VITURE gives this exact fix for its Luma glasses: press the STEAM button, go to Settings, then Audio, then Output Device, and select External device. It should work the same way for the Beast and Pro 2. That last part is our suggestion.

Compatibility checkerSteam Deck OLED + VITURE Luma ProWorks

Using a dock or an adapter?

PS5 or Xbox through VITURE's HDMI cable. VITURE says its HDMI to USB-C Adapter Cable carries "picture and sound" over the HDMI end. So the console has to send audio to HDMI. On a PS5, go to Settings, then Sound, then Audio Output, and make sure the output device is an HDMI device, not a headset. PlayStation also has a setting that moves sound to a headset whenever one connects. Turn it off if you use one sometimes.

Switch or Switch 2 on a VITURE dock. Unplug anything in the console's headphone jack. Nintendo says headphones take over the sound even in TV mode. If it's still quiet, try the console's TV Sound setting on Stereo. That one is our suggestion.

Beast with the original USB-C XR Charging Adapter. VITURE says that adapter doesn't let you adjust the Beast's brightness or volume. Use your phone's volume buttons instead, or step up to the Ultra adapter.

A dock that stays silent. Update the dock and the glasses. VITURE pushes compatibility fixes through firmware, and the Pro Mobile Dock needs version 1.03.0.05_20260127 or newer to work with the Beast at all.

Pro Neckband quirks

The Neckband runs Android, so it brings a few traps of its own.

  • Headgaze Navigation turns off volume. VITURE says "volume adjustment is unavailable when Headgaze Navigation is enabled." Turn it off, adjust the volume, then turn it back on.
  • One window can be muted. In multi-window mode, each window's top bar has a Mute button. VITURE says it "mutes that one window." Check the bar on the window you're watching.
  • Bluetooth headphones. You can pair headphones to the Neckband. If a pair is connected, check it isn't taking the audio. That's our suggestion, based on how Android handles outputs.
  • HARMAN AudioEFX presets. You can pick sound modes or turn AudioEFX off. If the sound is thin rather than missing, try another preset.
  • The Beast's menu goes away. VITURE says the glasses-side menu is unavailable on a Beast connected to the Neckband, but brightness, volume and tint buttons still work.

Sound cuts out during Immersive 3D

VITURE's Immersive 3D app for Mac and Windows has its own brightness and volume controls in its menu. They mirror the glasses' buttons. If the sound dropped when you started the app, check its volume slider first.

Still silent?

Try another device and another cable. If the glasses play sound from your laptop but not your phone, the problem lives on the phone. If they're silent everywhere, contact VITURE at happycustomer@viture.us. VITURE asks for your device model and operating system version. Add your glasses model, firmware version and any dock or adapter in between.

More help

New to AR glasses? Start here for the five things to do first.

Sources

  1. viture.com
  2. viture.com
  3. viture.com
  4. viture.com
  5. viture.com
  6. viture.com
  7. viture.com
  8. viture.com
  9. support.apple.com
  10. support.microsoft.com
  11. playstation.com
  12. en-americas-support.nintendo.com