XREAL glasses won't turn on? Check the power source first

XREAL glasses have no battery and no power button. If yours stay dark, it's usually power, sleep or the port. Fixes for the One, 1S, 1 Pro+, Air 2 and Beam Pro.

Type
Fix
By
Cole
Published
Verified

Your XREAL glasses look dead. Before you panic, know this: they have no battery and no power button. XREAL's own FAQ says the One series turns on by itself when a phone, tablet or computer powers it, and turns off when you unplug it. So when they won't turn on, the problem is almost always the power, the port or a sleep timer. Work down this page in order.

Note

We built this page from XREAL's manuals and FAQs for the One series, 1 Pro+ and xbx a01+, checked November 17, 2026. We haven't reproduced every case on our own glasses yet.

What "on" should look like

Plug the glasses into a device that sends video, and the XREAL logo should appear within a few seconds. No logo at all means the glasses aren't getting power or a signal. A logo followed by a warning is a different problem. For that one, see our XREAL no video signal fix.

1. Wake the device and reseat the cable

Start with the boring stuff. It fixes the most.

  1. Unlock your phone or wake your laptop. XREAL's 1 Pro+ guide puts "the source is awake and has sufficient power" at the top of its list.
  2. Push both cable ends all the way in. A half-seated plug can pass power but drop the picture.
  3. Use the cable from the box. Plenty of USB-C cables only charge. They can't carry video at all.
  4. Charge your device. A phone in low power mode, or a handheld near empty, may not run the glasses.

2. Put them on: they may just be asleep

This one catches a lot of people. The glasses save power when nobody's wearing them.

  • One, One Pro and 1S. XREAL says the screen turns off after about 2 minutes sitting still, while the sound keeps playing. After the Auto Shutdown time, everything except the motion sensor pauses. Put the glasses on and XREAL says the picture and sound come back on their own.
  • 1 Pro+. Take the glasses off and they go into deep sleep after the Auto Shutdown time. The default is 10 minutes. XREAL's advice is to check this setting "before treating the behavior as a fault."

So if your glasses sat on a desk while plugged in, pick them up and wear them for a moment. You can change the timer, from 30 seconds to Never. On the One series it's under Others, then Auto Shutdown. On the 1 Pro+ it's under Settings, then General.

3. Make sure the port sends video

XREAL says a USB-C connector alone doesn't guarantee your device works. The port has to send DisplayPort video. Some devices can't do that at all:

Compatibility checkeriPhone 16e + XREAL 1SDoesn't work

The fastest test is a second device. Try a laptop, a Steam Deck or a recent iPhone. If the glasses light up there, they're fine and the first device is the problem.

4. On a console? Check the adapter's power

A PS5 or Xbox can't plug in directly. It needs an HDMI adapter, and XREAL says to connect any power supply that adapter needs. No power to the adapter means no power to the glasses. Our XREAL console guide walks through the setup, and our HDMI adapter guide covers which adapters work.

5. They turn on, then shut off while you wear them

That's not a sleep timer. XREAL's checklist for the 1 Pro+:

  1. Check that the device is awake and has enough charge.
  2. Reconnect both cable ends firmly, and check any adapter's power supply.
  3. Try another device and another cable to narrow it down.
  4. Update the glasses' firmware.

XREAL's shut-down page for the One series says just one thing: update to the latest firmware. Our XREAL firmware log shows how, using Chrome on a Windows PC or Mac.

Got an xbx a01+?

The same checks apply. XREAL's xbx a01+ FAQ adds two: restart your device, and try a different cable.

Older Air, Air 2, Air 2 Pro or Air 2 Ultra

These run on your device's power too, so the same checks apply: wake the device, reseat the cable, and test a second device that sends video. The Air 2 has a multi-function key and brightness buttons on the frame. If nothing at all happens on two devices, contact XREAL support. XREAL's Air 2 guide lists support@xreal.com. Here's what older Air glasses still work with.

XREAL Beam Pro won't turn on

The Beam Pro is different. It's a small Android device with its own 4,300 mAh battery, and XREAL doesn't include a charger. Plug it into a USB-C charger of 27 W or more and give it a while before you try again. Here's what the Beam Pro does, and how long it lasts.

Beam Pro on, but the glasses show "initialization failed"? XREAL's Chinese FAQ lists four steps, in this order:

  1. Try another cable and reconnect the glasses.
  2. Long-press the My Glasses app, then clear its cache under App info.
  3. Restart the Beam Pro and plug the glasses back in.
  4. Restore the glasses' firmware on a computer at xreal.com/ota/recovery, then update at xreal.com/ota.

Still nothing?

Contact XREAL support. Tell them your glasses model, your device, the cable you used, and every step you tried. XREAL also asks for the firmware version if you can see it. That saves a round of back and forth. Bought in the last year? Here's how XREAL's warranty claims work.

Where to next

Sources

  1. tutorials.xreal.com
  2. tutorials.xreal.com
  3. tutorials.xreal.com
  4. tutorials.xreal.com
  5. tutorials.xreal.com
  6. tutorials.xreal.com
  7. tutorials.xreal.com
  8. tutorials.xreal.com
  9. resource.xreal.com
  10. xreal.com
  11. xreal.com