How to change AR glasses nose pads: XREAL, VITURE and RayNeo

Picture cut off at the top or bottom? A different nose pad usually fixes it. How to pick and swap nose pads on XREAL, VITURE and RayNeo glasses, with each size.

Type
How-to
By
Cole
Published
Verified

Nose pads aren't just about comfort. On AR glasses, they set how high the screens sit in front of your eyes. The wrong pad can cut off the top or bottom of the picture, or leave the edges soft. Most pairs come with spare pads in the box, and swapping one takes a minute. Here's how to pick and change them on each brand.

Note

Sizes and steps come from XREAL, VITURE and RayNeo's own guides, checked November 17, 2026. Where a tip is our own, we say so.

Signs you need a different pad

XREAL's fit guides give a simple check. With the glasses on and a picture showing, you should see:

  • The picture centered in your view.
  • The whole picture, all the way to the corners.
  • Nothing cut off or shifted.

If any of those fail, change the pad before you touch any settings. XREAL says the right pad helps image clarity and alignment, not just comfort.

The rule of thumb: the picture moves with the glasses. XREAL's 1 Pro+ guide says that if the picture sits too high, try the L pad. If it's too low, try S. Its R1 guide explains why: S sits the glasses higher on your nose, and L sits them lower.

XREAL nose pads

GlassesPadsFitted
One, One Pro and 1S3 sizesNot stated
1 Pro+S, M, LM
ROG XREAL R1S, M, LM
xbx a01+S, M, LM

Which size. XREAL says S suits a higher nose bridge, M a medium one and L a lower one.

How to swap, per XREAL's 1 Pro+ guide:

  1. Take the glasses off.
  2. Pull off the nose pad that's on them.
  3. Line the new pad up with the mounting slot.
  4. Press it gently into place until it's secure.
  5. Put the glasses on and check that both eyes see the whole picture.

Then set the arms. The temples on XREAL's current glasses tilt to three positions. XREAL says to set both sides the same. For the R1, it suggests starting in the middle and fine-tuning from there.

Older Air 2? It came with three nose pads and arms with three positions too.

Still choosing a pair? Our XREAL size guide covers pads, eye spacing and frame sizes.

VITURE nose pads

GlassesSizes in the box
BeastSwappable pads
Luma, Luma Pro, Luma Ultra1, 2 and 3
Pro 20, 1 and 2
Pro XR and One1, 2, 3 and 4

VITURE's goal is a screen that's "unobstructed and centered in your line of sight." Its Beast and Luma guides say to try each size, from 0 to 3, and to try no pad at all. If none fits, VITURE says to gently bend or spread the stems of the #3 pad. On the Pro XR and One, it's the #4 pad that's made for bending.

The Pro 2 adds more steps. Sizes 1 and 2 each clip into three positions, so with size 0 you get seven heights in all. The arms adjust to three positions too.

To take a pad off, per VITURE:

  1. Hold the glasses upright, with the arms pointing away from you.
  2. Put your thumb between the lenses, on the metal wire pad arms.
  3. Push forward until the pad comes off.

To put one on:

  1. Hold the new pad with its size number facing you and upright.
  2. Hold the glasses upright, with the arms toward you.
  3. Slide the pad into the bridge until it clicks.

RayNeo nose pads

RayNeo's Air glasses let you move the pad between positions. The GT series gives you different pads to try.

  • Air 4 Pro. The pad has three positions, and the arms tilt too. RayNeo's FAQ says to adjust both until the full screen is centered and sharp. The box includes two nose pad parts.
  • Air 3s. RayNeo says to push in or pull out the nose pad clip to pick one of three positions. The arms tilt to three angles.
  • GT and GT Max. RayNeo's GT guide says to try each nose pad option and adjust until the picture is centered. Don't twist or force the pad. The GT comes with two pads, and the GT Max with three heights.

Our fit tips

  • Change one thing at a time. Pad first, then the arms. Otherwise it's hard to tell what helped.
  • Check the corners. Open something with text in each corner, like a full-screen web page, and make sure you can read all four.
  • Got prescription inserts? Check the fit again after you fit them. XREAL's guides say to confirm the picture is still aligned.

When the pad isn't the problem

  • Edges still blurry? Eye spacing or focus may be off. Try our blurry edges fix.
  • Seeing lamps or windows in the picture? A closer fit helps, and so do a few other tricks. See how to cut reflections.
  • Headaches after a while? Our eye strain fix has settings that help.

Where to next

Sources

  1. tutorials.xreal.com
  2. tutorials.xreal.com
  3. tutorials.xreal.com
  4. tutorials.xreal.com
  5. resource.xreal.com
  6. viture.com
  7. viture.com
  8. viture.com
  9. viture.com
  10. rayneo.com
  11. rayneo.com
  12. rayneo.com