Blurry edges or text on XREAL glasses? Fit, IPD and settings
Soft edges or fuzzy text on your XREAL glasses? Clean them, fix the fit and IPD, then check screen size and text settings. Here's the order that works.
Blur on XREAL glasses comes in two kinds, and they have different fixes. Soft, doubled or cut-off edges usually mean the glasses don't sit right on your face. Fuzzy text everywhere usually means a setting: the screen is too big, your computer isn't at the right resolution, or a mode is trading sharpness for something else. Start at the top of the list below. Most people are sorted by step 3.
Note
These steps come from XREAL's guides for the One, One Pro, 1S, 1 Pro+, ROG XREAL R1 and xbx a01+, plus Apple and Microsoft's display pages, all checked November 12, 2026. We haven't run through every step on every model ourselves.
Fix it in this order
- Clean the lenses and peel off any film. New pairs ship with protective film on them.
- Fix the nose pad and temples. This is the big one for blurry edges.
- Fine-tune the IPD setting. It lines the picture up with your eyes.
- Check your prescription. Blur that's the same everywhere can just mean you need lenses.
- Shrink the screen or push it back. The default screen is huge.
- Turn on the text setting. Each model has one.
- Turn off Stabilizer for reading. It costs a little sharpness.
- Set your computer to its recommended resolution and scale.
- Leave 3D modes and 240Hz for games.
1. Clean the lenses and peel off the film
XREAL's One series ships with an "Optical Engine Protective Film" and a "Front Protective Film." If either is still on, take it off. Then wipe with a soft microfiber cloth. XREAL says a mild neutral cleaner is fine if you need one. On the ROG XREAL R1, XREAL says not to use anything containing alcohol or chemical solvents.
2. Fix the nose pad and temples
XREAL's own FAQ says it plainly: if you see blurry edges, "choose the appropriate nose pad size and adjust the temple arms." The pads move the picture up or down in your view. The temples tilt it.
- 1 Pro+: "If the image appears too high, try the L nose pad. If it appears too low, try S." Set both temples to the same position.
- R1 and xbx a01+: the S pad sits the glasses higher and the L pad sits them lower. Start the temples in the middle.
- Any model: keep adjusting until both eyes see the whole picture, corners included.
Our XREAL size guide explains which pad suits which nose. Here's how to swap the pads.
3. Fine-tune the IPD setting
IPD is the distance between your pupils. XREAL's One series guide says to adjust it if "the screen appears incomplete, double vision or the edges look unclear."
- One, One Pro and 1S: double-click X, go to Spatial Screen, and keep pressing minus to reach IPD Adjustment, the last item. There are 13 steps of 1 mm each. Step 7 is the default.
- 1 Pro+: go to Settings, then Help, then IPD Adjustment. Double-click X to save. XREAL says to try the nose pads and temples first.
- R1: it has the same setting. XREAL suggests it if you see "blurred edges or double vision."
One trade-off: XREAL says adjusting IPD "may slightly reduce the maximum screen size and the farthest screen distance." If you're near the edge of your frame's range and still can't get one clear picture, the frame may be the wrong size. The size guide covers the M and L frames on the One Pro and 1 Pro+.
4. Check your prescription
If everything is a little soft, edge to edge, you may need lenses. XREAL suggests prescription lenses in the same FAQ answer about blurry edges. The R1 even comes with a blank insert your optician can fit with lenses. Our lens guides for the One Pro and 1 Pro+ list what XREAL sells. Strong prescription or astigmatism? Here's what each brand can handle.
5. Shrink the screen or push it back
A bigger screen spreads the same pixels further, and you end up looking at its edges out of the corner of your eye. The defaults are big: 147 inches on the One, 154 on the 1S and 171 on the One Pro, all at 4 m.
- One series: go to Spatial Screen, then Screen Size or Screen Distance. Distance runs from 1 to 10 m.
- 1 Pro+: pick Screen Size or Screen Distance in the menu, or use the Quick Panel. Sizes run from about 34 to 556 inches.
For reading, try a smaller screen first. You'll take in a whole page without turning your eyes. Here's how to change the screen size, step by step.
6. Turn on the text setting
| Glasses | Setting | What it does |
|---|---|---|
| XREAL One, One Pro, 1S | Display, then Text Optimization | Smooths jagged edges on text |
| ROG XREAL R1 | Image, then Text Enhancement | Adds "clarity and anti-aliasing" |
| XREAL 1 Pro+ | Display and Sound, then Reading mode | "Enlarges the view to make text easier to read" |
Two notes. XREAL's One series menu overview calls the setting Text Enhancement, while its own page for it says Text Optimization. Look for either. And on the 1 Pro+, Reading mode doesn't work together with AI HDR.
7. Turn off Stabilizer for reading
Stabilizer steadies the screen when your head moves. XREAL's advice: "Enable Stabilizer for a steadier image during head movement; disable it for better display quality." It's on by default in Follow mode, under Spatial Screen. Sitting still to read? Turn it off. XREAL's xbx a01+ guide also lists "reading small text" as a bad fit for its Stabilization mode.
8. Set your computer's resolution and scale
On a Mac, Apple says "the display's default, native resolution might be sharper than a scaled resolution." Open System Settings, then Displays, select the glasses and pick the default. On Windows, Microsoft warns that below the native resolution "text won't look as sharp." Pick the resolution and the Scale setting marked "(Recommended)."
Compatibility checkerMacBook Air (M5) + XREAL 1SWorks9. Leave 3D modes and 240Hz for games
Some modes trade sharpness on purpose.
- REAL 3D turns 2D into 3D. XREAL says it's "Not recommended for office work, reading text documents, or precision tasks."
- Half side-by-side 3D squeezes two views into one 1920×1080 frame, so each eye gets half the detail.
- The R1 at 240Hz. XREAL's own troubleshooting page is titled "Text Looks Slightly Blurry at 240Hz." Drop the refresh rate when you work.
Why some pairs look sharper at the edges
It's partly the optics. The One and 1S use birdbath lenses. The One Pro and 1 Pro+ use a flatter design XREAL calls X Prism, and Tom's Hardware notes it also widened the view from 50° to 57°. XREAL markets the One Pro with a "No Blur" tagline and says its two frame sizes help with blurry and cut-off edges. That's XREAL's claim, not a measurement. Any pair can still look soft if it doesn't fit. Here's how birdbath and prism optics differ.
Blurry only when you move your head?
That's motion blur, not focus. It smears when you turn your head and clears when you stop. Our screen drift fix explains why it happens and which brightness level XREAL suggests.
Still blurry?
Contact XREAL Support. Tell them your glasses model and frame size, your IPD in millimeters if you know it, which nose pad you use and your firmware version. If you're on a 1 Pro+ and can't get one clear image, XREAL itself suggests comparing both frame sizes or contacting support.
More help
- No picture at all? Try our XREAL no video signal fix.
- Picture flickers on a Mac? Here's our Mac flicker and connection fix.
- No sound? Here's where your XREAL audio went.
- Want sharper text? See XREAL best settings for Text Optimization and more.
New to AR glasses? Start here for the five things to do first.
Sources
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- tutorials.xreal.com
- xreal.com
- tomshardware.com
- androidcentral.com
- support.apple.com
- support.microsoft.com