How to factory reset VITURE glasses, the Pro Neckband and docks
How to reset a VITURE Beast, what to do on a Luma or Pro 2 with no reset option, and how to wipe the Pro Neckband, even when it won't start. Plus VITURE docks.
VITURE handles resets differently on each device. The Beast has a Factory Reset in its menu. The Luma series and Pro 2 don't list one, so you put the few settings they keep back by hand. The Pro Neckband has a full wipe, plus a backup method for when it won't start. Here's how to do each.
Note
The steps come from VITURE's manuals, release notes and web tools, checked November 17, 2026. We haven't run every reset ourselves yet. Where a tip is our own, we say so.
Which reset your device has
| Device | Reset option |
|---|---|
| Beast | Menu, then About, then Factory Reset |
| Luma, Luma Pro, Luma Ultra | None listed. Color tools have their own Reset. |
| Pro 2, Pro XR and One | None listed |
| Pro Neckband | Settings, then System, then Reset options |
| Dock Mini and Pro Mobile Dock | None listed. Reinstall the firmware instead. |
How to reset the VITURE Beast
- Update the firmware first. VITURE's release notes say Factory Reset arrived in Beast firmware 0.01.025, on June 8, 2026. VITURE's Beast manual still calls it a future update, so if you don't see it, update. Our VITURE firmware log shows how.
- Plug the glasses into a phone, laptop or handheld. On the Pro Neckband, VITURE says the Beast's own menu isn't available.
- Press and hold L1 to open the menu.
- Use L+ and L- to move down to About, then press L1.
- Pick Factory Reset with L1 and confirm. VITURE says it "clears all settings and restores factory defaults."
Move steadily. The Beast's menu saves and closes by itself after 8 seconds with no button press.
After a Beast reset
- Language is under Settings in the same menu.
- Your button shortcuts go back to default. Double-press R1 switches 3D and double-press L1 switches Side Mode, until you change them under Settings.
- Screen size and distance go back too. Hold R+ to change the size, or hold R- to change the distance.
- Calibrate. VITURE says newer Beast firmware calibrates itself if you leave the glasses still on a flat surface for about 10 seconds while plugged in.
Luma series, Pro 2, Pro XR and One
VITURE's manuals for these glasses don't list a factory reset. They keep only a few settings, so here's how to put each one back.
- Color mode. Double-press L1, then use L+ and L- to pick a mode. On a Pro XR, hold the + button instead.
- Fine-tuned color on a Luma Pro or Luma Ultra. VITURE's Color Tuning tool, at viture.com/firmware/color-tuning, has a Reset option. VITURE says it "restores all settings to their factory configuration." You'll need Chrome 98 or later on a Windows PC or Mac.
- Eye axis. Triple-press L1, then use L+ and L- to line the picture up again. On a Pro XR, triple-press the Mode button.
- Wearer Detection and High Color Accuracy Mode. These switches live on VITURE's update page, viture.com/firmware/update. Set them back there.
Still not right? Reinstalling the firmware is worth a try. VITURE's update page lets you pick a version from a drop-down and install it. Afterwards, VITURE recommends calibrating the glasses' motion sensor.
Screen size and layouts in SpaceWalker are app settings, not glasses settings. Our tip: if the app's layout is a mess, reinstall the app. Here's how SpaceWalker works.
How to reset the Pro Neckband
VITURE recommends a reset before you sell, give away or dispose of the Neckband. It says a reset can also help with severe problems. It erases all data, apps and settings, and it can't be undone. Back up anything you want to keep first.
From the system:
- Go to Settings, then System.
- Scroll to the bottom and tap Reset options.
- Pick Erase all data (factory reset), then confirm.
- The screen goes black while it works. When it's done, the welcome screen asks you to connect the Remote App.
If the Neckband won't start or you can't use it, VITURE has a forced reset:
- Turn the Neckband fully off.
- Connect your glasses to the USB-C port on the bottom of the Neckband, using the long magnetic cable.
- Hold Power and Volume Up together until the VITURE logo shows, then let go.
- Unplug the cable from the glasses, wait a moment, then plug it back in.
- When a tilted robot appears, hold Power and press Volume Up. That opens Android Recovery Mode.
- Use Volume Up and Down to highlight Wipe data / Factory reset, then press Power to confirm.
Beast owners: VITURE says the forced method can't show a picture on the Beast, so it can't be finished. Use the reset in Settings instead.
VITURE docks
VITURE's Dock Mini manual lists no factory reset, and we didn't find one for the Pro Mobile Dock. When a dock acts up, VITURE's fix is the firmware.
- All four lights blinking on a Dock Mini means bootloader mode. VITURE says to reconnect the dock and update the firmware again.
- To update, use viture.com/firmware/mobile-dock/update in Chrome 98 or later. On a Dock Mini, take off the Adapter module first. Our firmware log has the full steps.
Where to next
- Glasses stay dark? A reset won't help with that. Try VITURE glasses won't turn on.
- Picture but no sound? See the VITURE no sound fix.
- Got XREAL glasses too? Here's how to factory reset XREAL glasses.