XREAL Eye: what the $99 camera does, and is it worth it?

The XREAL Eye clips onto XREAL's One series and 1 Pro+. It adds 6DoF, hand gestures and photos. Here's what each feature does and who should skip it.

Type
Accessories
By
Cole
Published
Verified

The XREAL Eye is a tiny camera that plugs into the middle of an XREAL One series or 1 Pro+ frame. It costs $99 and weighs 1.35 g. It does three things: it pins your screen in your room as you move (6DoF), it reads your hand gestures and it takes photos and short videos. Here's what each one is like, what it can't do and who should skip it.

Note

This comes from XREAL's Eye manual, FAQ, spec sheet and troubleshooting page, plus its 1 Pro+ manual, checked November 16, 2026. We haven't used the Eye ourselves yet. Where a point is our own view, we say so.

Which glasses it fits

The Eye fits the XREAL One, One Pro, 1S and 1 Pro+. It plugs into a slot in the middle of the frame and draws power from the glasses, so it has no battery to charge. XREAL rates the connector for at least 2,000 insertions. XREAL's spec sheet names the One series, and its 1 Pro+ manual covers the Eye too.

Feature 1: Spatial Anchor (6DoF)

This is the main reason to buy one. Without the Eye, the One series already has Anchor mode. That's 3DoF: the screen stays put when you turn your head, but it moves with you if you lean in or walk. With the Eye, Anchor becomes Spatial Anchor. The screen stays fixed in your room, like a real TV.

How to turn it on: open the menu, go to Spatial Screen, then turn on Spatial Anchor. Follow the on-screen calibration. After that, clicking X switches between Follow and Spatial Anchor.

XREAL's demo: set the screen to 10 m, make it as big as it goes, then walk toward it. Or long-press X to fix the screen, pick up your device and walk right through it.

The catch. The Eye tracks by watching your room. XREAL says it falls back to Follow mode when:

  • You sit still for a long time
  • The room is dark
  • You face a blank, plain wall

XREAL also says to hold your head still while you turn it on, and not to face moving things, like a TV playing. Otherwise the screen can drift.

Feature 2: hand gestures

With the Eye attached, the One series and 1 Pro+ can read pinches and wrist flips as clicks and scrolls on whatever you're plugged into. XREAL still calls it experimental, and turning on 3D Mode switches gestures off. Here's how to set up gesture control.

Feature 3: photos and video

The Eye has a 12MP camera with an f/2.25 aperture and electronic stabilization. Here's what it records, per XREAL:

PhotosUp to 2016×1512, JPG
Video1600×1200 at 30 or 60 fps, MP4
Clip length15 seconds by default, 30 or 60 optional, 2 minutes max
Storage2 GB on the glasses

When you plug in the Eye, the Quick Button switches to click for a photo and hold for video. On a 1 Pro+, XREAL says unplugging the Eye doesn't put your old Quick Button setup back. Reassign it under Settings, then Quick Button.

Getting files off. The glasses have no photo viewer. Turn on Transmission Mode under My, then XREAL Eye, then Export Photos/Videos. The glasses then show up as a drive called XREAL on a Mac, PC or Android phone. On an iPhone, use Import in the Photos app.

What it can't do. XREAL's spec sheet lists no ultra-wide angle, night mode, macro, portrait mode, manual controls, 3D video or burst shots. It's a quick point-of-view camera, not a replacement for your phone.

Bonus: mixed reality recording with a Beam Pro

Pair the Eye with XREAL's $199 Beam Pro and you can record your virtual screens over the real world, in one video. XREAL says apps with copy protection, like most streaming apps, record as black.

Is it worth it?

Our view, based on XREAL's own descriptions:

Get it if:

  • You work at a desk and lean toward the screen a lot. 6DoF keeps text still.
  • You want the "TV on the wall" feel while you move around a room.
  • You'd like to pause videos with a pinch instead of reaching for your phone.
  • You want quick first-person clips without holding a phone.

Skip it if:

  • You mostly watch while sitting still on a couch, plane or bed. Built-in Anchor mode already holds the screen when you turn your head. And sitting still for a long time can drop Spatial Anchor back to Follow anyway.
  • You watch in the dark. The Eye needs light to track.
  • You want a real camera. Short clips at 1600×1200 are fine for sharing, not for keepsakes.
  • You don't want a camera on your face at all. Our no-camera glasses guide lists the One series as camera-free until you add the Eye.

How it compares

VITURE's Luma Ultra has 6DoF cameras built in, but it needs its SpaceWalker app on a computer or the Pro Neckband to use them. Here's how that works. The Eye works through the glasses' own menu, on any device that sends video.

Troubleshooting

  • Screen disappears in Spatial Anchor, but returns in Follow? XREAL says to unplug the Eye, plug it back in firmly and turn Spatial Anchor on again.
  • Photos or videos show 0 KB? Same fix: reseat the Eye, then try again.
  • Eye feels loose? XREAL says to contact support.
  • Updates. The Eye has no firmware of its own. It updates with the glasses. Here's the XREAL firmware log.

More help

New to AR glasses? Start here for the five things to do first.

Sources

  1. tutorials.xreal.com
  2. tutorials.xreal.com
  3. tutorials.xreal.com
  4. tutorials.xreal.com
  5. tutorials.xreal.com
  6. tutorials.xreal.com
  7. tutorials.xreal.com
  8. tutorials.xreal.com
  9. tutorials.xreal.com
  10. us.shop.xreal.com